AldoCoat 384 Polyurethane Aluminum
ALDOCOAT 384 is a technologically advanced, high solids, single component, moisture cure polyurethane elastomer coating uniquely formulated for the protection of spray polyurethane foam insulation and traditional roofing substrates, such as single ply membrane and BUR surfaces. Once cured this liquid applied moisture-curing polymer provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, ALDOCOAT 384 provides greater UV protection than similar generic coatings and offers increased resistance to moisture penetration through its lower moisture vapor permeability values. Due to its moisture-cure properties, a longer production window can be achieved during application.
ALDOCOAT 384 was specifically developed as a protective coating for sprayed-in-place polyurethane foam roofing. With excellent adhesion, ALDOCOAT 384 may be used as well for protection of conventional commercial/industrial surfaces such as, but not limited to, TPO and EPDM single ply membranes, modified bitumen, smooth BUR, concrete, masonry and the lining and sealing of interior gutter systems.
TYPICAL PHYSICAL PROPERTIES
WEIGHT PER GALLON: 9.0 lb per gallon ± 0.2
FLASH POINT: 80° F
CLEAN UP: Xylene
SHELF LIFE: 90 days @ 40°- 90° F
ELONGATION: 350% ± 50
HARDNESS: 69 Shore A
TENSILE STRENGTH: 1000 psi ± 50
PERMEABILITY: .02 perm inch
SERVICE TEMPERATURE: -50º TO 200º F
ADHESION: Exceeds Tensile
CURE TIMES: DRY TO TOUCH: 6 Hours
TACK FREE: 8- 12 Hours
RECOAT: 12- 16 Hours
Have a question? Ask Aldo how we can help you and your clients!
The roof is the most vulnerable part of any commercial facility. It takes a beating from the elements, both day and night, without protection. Its job is to protect everything else: the building contents, employees and patrons. An in-tact roof is essential to the...